Logismarket, the Industrial Directory.

Cabinets for the storage, in proper containers of 10 and 25 liters, of lubricant and coolant oils and liquids. These cabinets made by Huni Italiana have always been considered among the best in industrial furnishings. They are made from solid sheet steel and GS-TÜV certified. Safety certification is guaranteed by the German Institute TÜV-Rheinland, which is synonymous with strong products, perfectly finished and without any sharp edge or angles. Designed and made for the total security.

The cabinets are made in two versions:

• With folding, locking doors: dimensions LXWXH = 717x748x1450
• With shutter locking: dimensions LXWXH = 717x774x1450, LXWXH = 717x774x1625

Pull-out shelves can be fixed inside the cabinet, with a telescopic system and a capacity of 200 kg for the containers. 4 cans of 25 liter or 5 cans of 10 liters can be placed on every shelf. The cans are made from NDPE plastic, and include a screw top with a filter and a brass tap.
On the bottom of the cabinet a tank can be placed to collect fluids in case of accidental leaks. It has an airtight closure, with a capacity of 40 liters, and slides on lateral runners. The cabinet in conformity with regulations regarding water protection and can be equipped with a base support to be placed under the cabinet which serves as a spill control system. Equipped with a grid to walk on.

Cabinets can hold:

• 20 cans with a capacity of 10 liters each, or
• 14 cans, of which 10 hold 10 liters each and 4 hold 25 liters each, or
• 8 cans with a capacity of 25 liters each.

The 1875 mm rolling shutter cabinets can hold:

• 13 cans, of which 8 have a capacity of 25 liters each and 5 a capacity of 5 liters each.