With the control box integrated as part of the mast, the operator is required only during the initial and end phases of the wrapping cycle to set up film roll carriage manually, as well as release the machine break and adjust carriage height. Other manual operations are hooking the film/net to the pallet, and cutting it at the end of the wrap cycle. All other wrapping phases can be programmed and carried out automatically.

Once load has been positioned correctly, all that is required is a touch of the green button to activate the platform's gradual rotation. The only manually actions are the clamping of the film to the turntable, at the beginning of the process, and its cutting at the end The MIDO Model features a powered film carriage with brake system to adjust film tension on the load, as well as two wrapping cycles and load height detection by photocell.

Standard Equipment

• Single and cross wrapping.
• Soft start and indexed stop.
• Variable turntable speed.
• Mecatens film brake for film tension on load.
• Film/net holding hook on turntable.
• Timed top reinforcing wraps.
• Timed bottom reinforcing wraps.
• Photocell load height detection.
• Harmonic suppresor line filter.
• Automatic reset button.
• Back spaces for forklift transport.
• Variable film carriage speed.

Options

• Access Ramp.
• Pit frame for floor embedding.
• Variable film carriage speed.
• Electromagnetic film brake.
• Pneumatic top plate.
• Manual ratio film powered pre-stretch.
• Fixed ratio film powered pre-stretch.
• Turntable roller conveyors.
• Turntable for manual pallet truck.
• Wide range of load heights, weights and turntable diameters.
• Flat board wrapping kit.
• Galvanised inox steel version.
• Single phase or 380 V III.
• Other specifications on request.