With the control box integrated as part of the mast, the operator is required only during the initial and end phases of the wrapping cycle to set up film roll carriage manually, as well as release the machine break and adjust carriage height. Other manual operations are hooking the film/net to the pallet, and cutting it at the end of the wrap cycle. All other wrapping phases can be programmed and carried out automatically.

Once load has been positioned correctly, all that is required is a touch of the green button to activate the platform's gradual rotation. The only manually actions are the clamping of the film to the turntable, at the beginning of the process, and its cutting at the end. DNC customises all models of machinery to meet with specific customer requirements, and offers a wide range of options and accessories.

Standard Equipment

• Single and cross wrapping.
• Rainproofing program
• Soft start and indexed stop.
• Variable turntable speed.
• Mecatens film brake for film tension on load.
• Film/net holding hook on turntable.
• Real number settings of top and bottom reinforcing layers.
• Photocell load height detection.
• Automatic or manual mode selector.
• Harmonic suppresor line filter.
• Automatic reset button.
• Back spaces for forklift transport.

Options

• Access Ramp.
• Pit frame for floor embedding.
• Variable film carriage speed.
• Electromagnetic film brake.
• Pneumatic top plate.
• Automatic powered top plate.
• Fixed ratio film powered pre-stretch.
• Turntable roller conveyors.
• Turntable for manual pallet truck.
• Wide range of load heights.
• Wide range of load weights.
• Wide range of turntable diameters.
• Flat board wrapping kit.
• Galvanised inox steel versions
• Single phase or 380 V III.
• Other specifications upon request.