Home
→
Warehouse Equipment & Installations
→
Docks, Doors, Shelters & Industrial Ramps
→
Industrial Doors
→
High-Speed Roll-Up Doors
High-Speed Door
- Brand: Controlsa
- Model: Self-Repairing® Door
The best solution for access doors and space separation; ideal for store-rooms, supermarkets.
Detailed information about the product High-Speed Door
The Controlsa High-Speed Self-Repairing® Door is the best solution for access doors and space separation. Produced and constantly updated since 1994, the Self-Repairing® Door has progressively incorporated the latest advances in electronics. Incorporation of a completely electronic control panel and its exclusive patented frame guide and control system has set it apart from the rest. Should there be an impact against the canvas, this system enables the curtain to slip out of the frame guides only to return back again once the door is raised, through the simple pressing of a button, thus keeping costs for repair and maintenance to a minimum. Ideal for store-rooms, supermarkets, and any other separation of areas requiring quick yet secure access.
Vertical Columns
Manufactured from surface treated extruded aluminium. Also available in stainless steel.
Rolling System
Drum manufactured from extruded aluminium, with a steel shaft and fitted with an alignment system.
Textile-Reinforced Canvas
The canvas is fitted with a side stop design that is exclusive to Controlsa. The canves, in the event of impact, easily pops out of the frame guides, with the stops returning to their position automatically on operation of the door. Controlsa's extensive range of canvases provides customers with the perfect solution for every application. Optional View Ports. Type M2 fire-resisting canvas. Rot, fungi and UV resistant.
Operating System
Equipped with a frequency converter and programmable automation which can be connected to a single-phase circuit (220V Phase + Neutral + Ground), programmed control of upper and lower stopping points, with acceleration and deceleration ramps, allowing for speed selection and delay timer action.
Thanks to the use of the latest advances in electronics, the electronics panel supports connection with industrial data networks (profibus, modbus, two-wire connections, etc.) and also remote control of the door by means of xcada and similar.
The single-phase provides an uninterrupted power supply (UPS), thus allowing for normal door operation in the event of a power failure (optional). The number of operations will depend on the type of door, its measurements and location.
Electronic Safety Sensor While Closing
When an obstacle enters into the path of the canvas while the door is closing, and is not detected by the safety cell, the door features a patented electronic sensor system that will detect obstacles and reverse motor rotation, making it completely safe both for personnel and loads in transit.
Safety Cell
Prevents the door from closing when it is blocked, or reverses the direction of the door while closing.
Opening and Closing Speed
Variable, depending upon the model, application for which the door is to be used and also on door dimensions.
Protection Level
Normal environments without condensation. For other environments, please consult Controlsa.
Available in a wide range of colours, in both standard and market canvas.
Vertical Columns
Manufactured from surface treated extruded aluminium. Also available in stainless steel.
Rolling System
Drum manufactured from extruded aluminium, with a steel shaft and fitted with an alignment system.
Textile-Reinforced Canvas
The canvas is fitted with a side stop design that is exclusive to Controlsa. The canves, in the event of impact, easily pops out of the frame guides, with the stops returning to their position automatically on operation of the door. Controlsa's extensive range of canvases provides customers with the perfect solution for every application. Optional View Ports. Type M2 fire-resisting canvas. Rot, fungi and UV resistant.
Operating System
- Button switch
- Chain
- Magnetic field
- Photoelectric cell
- Radar
- Remote control
Equipped with a frequency converter and programmable automation which can be connected to a single-phase circuit (220V Phase + Neutral + Ground), programmed control of upper and lower stopping points, with acceleration and deceleration ramps, allowing for speed selection and delay timer action.
Thanks to the use of the latest advances in electronics, the electronics panel supports connection with industrial data networks (profibus, modbus, two-wire connections, etc.) and also remote control of the door by means of xcada and similar.
The single-phase provides an uninterrupted power supply (UPS), thus allowing for normal door operation in the event of a power failure (optional). The number of operations will depend on the type of door, its measurements and location.
Electronic Safety Sensor While Closing
When an obstacle enters into the path of the canvas while the door is closing, and is not detected by the safety cell, the door features a patented electronic sensor system that will detect obstacles and reverse motor rotation, making it completely safe both for personnel and loads in transit.
Safety Cell
Prevents the door from closing when it is blocked, or reverses the direction of the door while closing.
Opening and Closing Speed
Variable, depending upon the model, application for which the door is to be used and also on door dimensions.
Protection Level
Normal environments without condensation. For other environments, please consult Controlsa.
Available in a wide range of colours, in both standard and market canvas.
| Opening Speed | up to 1.2m/sec |
|---|---|
| Closing Speed | 0.4 and 0.6m/sec |
Related Products with High-Speed Door
|
Technical Services and Maintenance
|
Multimedia content related to the product High-Speed DoorClose

